Prof. Dr.-Ing. Reinhard Lerch

Name: Lerch, Reinhard

Position: Lehrstuhlinhaber

Zimmer: 02.035

Tel: +49 9131 85-23131

E-Mail: reinhard.lerch [at] fau.de

Lehre

Buchveröffentlichungen

Publikationen

  • Publikationen (ab Anfang 2010)

    2017

    • Kroh, P., Fink, M., Günther, H.-M., & Lerch, R. (2017). Low-power optimized, widely customizable, time-controlled wireless sensor/actuator data transmission with commercial off-the-shelf standard components. In Proceedings - AMA Conferences 2017 with SENSOR and IRS² (pp. 395 - 400). 31515 Wunstorf / Germany.
    • Linnert, M., Lerch, R., Sutor, A., & Rupitsch, S. (2017). Characterization and Simulation of a Magnetized Sample. In PROCEEDINGS – AMA Conferences 2017 (pp. 424-428).

    2016

    • Ogo, K., Kakimoto, K., Weiß, M., Rupitsch, S., & Lerch, R. (2016). Determination of temperature dependency of material parameters for lead-free alkali niobate piezoceramics by the inverse method. AIP Advances. https://dx.doi.org/10.1063/1.4953327
    • Winter, P., Haas, S., Wenzel, M., Weiß, M., & Lerch, R. (2016). Der Einfluss der Grenzschichtdicke auf die aeroakustische Schallentstehung an einem generischen Heckklappenspaltmodell. In Deutsche Gesellschaft für Akustik e.V. (DEGA) (Eds.), Fortschritte der Akustik 42 - DAGA 2016 (pp. 1429-1432). Aachen, DE: Berlin: Deutsche Gesellschaft für Akustik e.V. (DEGA).
    • Weiß, S., Sutor, A., Ilg, J., Rupitsch, S., & Lerch, R. (2016). Measurement and Analysis of the Material Properties and Oscillation Characteristics of Synthetic Vocal Folds. Acta Acustica United With Acustica, 102(2), 214-229. https://dx.doi.org/10.3813/AAA.918938
    • Weiß, M., Ilg, J., Rupitsch, S., & Lerch, R. (2016). Inverse Methode zur Charakterisierung des mechanischen Frequenzverhaltens isotroper Werkstoffe. Tm-Technisches Messen, 83(3), 123-130. https://dx.doi.org/10.1515/teme-2015-0094
    • Löffler, M., Nierla, M., Kadur, M., Hoffmann, M., Sutor, A., & Lerch, R. (2016). Optimizing the dimensions of an inverse magnetostrictive MEMS pressure sensor by means of an iterative Finite Element scheme. IEEE Transactions on Magnetics, 52(7). https://dx.doi.org/10.1109/TMAG.2016.2526629
    • Löffler, M., Nierla, M., Kadur, M., Sutor, A., & Lerch, R. (2016). FEM-based optimization of an inverse-magnetostrictive pressure sensor. In AIP, IEEE (Eds.), Abstract Book (pp. 440).
    • Yoshida, K., Kakimoto, K., Weiß, M., Rupitsch, S., & Lerch, R. (2016). Determination of temperature dependences of material constants for lead-free (Na0.5K0.5)NbO3–Ba2NaNb5O15 piezoceramics by inverse method. Japanese Journal of Applied Physics, 55(10S).
    • Hochradel, K., Dorsch, P., Häcker, T., Hohler, T., Sutor, A., & Lerch, R. (2016). A low cost - high accuracy multisensor array for bat localization.
    • Weiß, M., Rupitsch, S., & Lerch, R. (2016). Simulation-based homogenization and characterization of piezoelectric actuators.
    • Weiß, M., Rupitsch, S., & Lerch, R. (2016). Homogenization and characterization of piezoelectric stack actuators by means of the inverse method.
    • Lerch, R. (2016). Elektrische Messtechnik Analoge, digitale und computergestützte Verfahren. Heidelberg: Springer Vieweg.
    • Hochradel, K., Dorsch, P., Häcker, T., Sutor, A., & Lerch, R. (2016). Fehlerbetrachtung und Kalibrierung eines portablen Mikrofonarrays zur multilateralen Ortung von Ultraschall-Fledermausrufen.

    2015

    • Winter, P., Weiß, M., Wüst, M., Schimmelpfennig, S., & Lerch, R. (2015). Untersuchung der aeroakustischen Schallentstehung an einem generischen Heckklappenspaltmodell. In Deutsche Gesellschaft für Akustik e. V. (DEGA) (Eds.), Fortschritte der Akustik 41 - DAGA 2015 (pp. 596-599). Nürnberg, DE: Berlin: Deutsche Gesellschaft für Akustik e. V. (DEGA).
    • Sutor, A., Bi, S., & Lerch, R. (2015). Identification and verification of a Preisach-based vector model for ferromagnetic materials. Applied Physics A-Materials Science & Processing, 118, 939-944. https://dx.doi.org/10.1007/s00339-014-8817-1
    • Koch, A., Stiller, F., Lerch, R., & Ermert, H. (2015). An Ultrasound Tomography System With Polyvinyl Alcohol (PVA) Moldings for Coupling: In Vivo Results for 3-D Pulse-Echo Imaging of the Female Breast. IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control, 62, 266-279. https://dx.doi.org/10.1109/TUFFC.2014.006494
    • Dorsch, P., Gedeon, D., Albach, T., Rupitsch, S., Spies, P., & Lerch, R. (2015). Towards a Miniaturized, Impulse-Excited, Piezoelectric Energy Harvesting Device. Procedia Engineering, 120, 1032-1036. https://dx.doi.org/10.1016/j.proeng.2015.08.713
    • Ogo, K., Weiß, M., Rupitsch, S., Lerch, R., & Kakimoto, K.-I. (2015). Characterization of lead-free alkali niobate piezoceramics by the Inverse Method. In Ultrasonics Symposium (IUS), 2015 IEEE InternationalInstitute of Electrical and Electronics Engineers (IEEE).
    • Löffler, M., Kremer, R., Sutor, A., & Lerch, R. (2015). Hysteresis of the resonance frequency of magnetostrictive bending cantilevers. Journal of Applied Physics, 117(17). https://dx.doi.org/10.1063/1.4916162
    • Ogo, K., Kakimoto, K., Weiß, M., Rupitsch, S., & Lerch, R. (2015). Material constants of alkali niobate lead-free piezoceramics determined by the Inverse Method.
    • Weiß, M., Ilg, J., Rupitsch, S., & Lerch, R. (2015). Inverse Method for Determining Material Parameters of Piezoceramics and Passive Materials. In Proceedings SENSOR 2015.
    • Weiß, M., Hohlfeld, K., Gebhardt, S., Rupitsch, S., Lerch, R., & Michaelis, A. (2015). Inverse Method for Determining piezoelectric material parameters of piezoceramic fiber composites. In Leightweight Design by Integrating Functions (pp. 77-82).

    2014

    • Löffler, M., Rupitsch, S., Sutor, A., & Lerch, R. (2014). Toward a Novel Remote Pressure Sensor: Influence of Static Magnetic Fields on the Resonance Frequency of Magnetostrictive Microcantilevers. IEEE Transactions on Magnetics, 50(11). https://dx.doi.org/10.1109/TMAG.2014.2319176
    • Bi, S., Wolf, F., Lerch, R., & Sutor, A. (2014). An Inverted Preisach Model With Analytical Weight Function and Its Numerical Discrete Formulation. IEEE Transactions on Magnetics, 50(11). https://dx.doi.org/10.1109/TMAG.2014.2329836
    • Ploß, P., Rupitsch, S., & Lerch, R. (2014). Extraction of Spatial Ultrasonic Wave Packet Features by Exploiting a Modified Hough Transform. IEEE Sensors Journal, 14(7), 2389-2395. https://dx.doi.org/10.1109/JSEN.2014.2311160
    • Scharrer, T., Schrapp, M., Rupitsch, S., Sutor, A., & Lerch, R. (2014). Ultrasonic imaging of complex specimens by processing multiple incident angles in full-angle synthetic aperture focusing technique. IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control, 61(5), 830-839. https://dx.doi.org/10.1109/TUFFC.2014.2974
    • Chen, L., Rupitsch, S., Grabinger, J., & Lerch, R. (2014). Quantitative Reconstruction of Ultrasound Fields in Optically Transparent Isotropic Solids. IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control, 61(4), 685-695. https://dx.doi.org/10.1109/TUFFC.2014.2956
    • Gabriel, C., Müller, S., Ullrich, F., & Lerch, R. (2014). A new kind of sensor array for measuring spatial coherence of surface pressure on a car's side window. Journal of Sound and Vibration, 333(3), 901-915. https://dx.doi.org/10.1016/j.jsv.2013.09.045
    • Löffler, M., Sutor, A., Rupitsch, S., & Lerch, R. (2014). Resonance Frequency Shift of Magnetostrictive Microcantilevers due to DeltaE Effect. In VDE (Eds.), ITG-Fachbericht 250.
    • Löffler, M., Rupitsch, S., Lerch, R., & Sutor, A. (2014). Towards a novel remote pressure sensor: Influence of static magnetic fields on the resonance frequency of Magnetostrictive Microcantilevers. In Proceedings (pp. 1178-1179).
    • Scharrer, T., Rupitsch, S., Sutor, A., & Lerch, R. (2014). Ultraschallbildgebung komplexer Bauteile mittels Einbeziehung multipler Einschallwinkel in die Synthetische-Apertur-Fokussierungstechnik. In Fortschritte der Akustik - DAGA 2014 (pp. 543-544).
    • Rupitsch, S., Fink, M., & Lerch, R. (2014). Simultane Ermittlung von Schallgeschwindigkeit und Dicke dünner Platten mittels Ultraschall. In Fortschritte der Akustik - DAGA 2014 (pp. 545 - 546).
    • Sutor, A., Bi, S., & Lerch, R. (2014). Identification and Verification of a Vector Model for Ferroic Materials. In ITG-Fachbericht Sensoren und Messsysteme 2014.
    • Löffler, M., Piepgras, R., Sutor, A., & Lerch, R. (2014). Measurement of the magnetization of thin-film samples subjected to mechanical stress. In Proceedings (pp. 55-59).
    • Löffler, M., Kremer, R., Sutor, A., & Lerch, R. (2014). Hysteresis of the resonance frequency of magnetostrictive bending cantilevers. In Book of Abstracts.
    • Horn, P., Metzger, J., Wüst, M., & Lerch, R. (2014). System for spatially resolved sound field measurements. Tm-Technisches Messen, 81(7-8), 363-370. https://dx.doi.org/10.1515/teme-2014-1032
    • Sutor, A., Bi, S., & Lerch, R. (2014). Identification and Verification of a Preisach Based Vector Model for Ferromagnetic Materials. In Proceedings of INTERMAG2014 (pp. 2254-2256).
    • Bi, S., Wolf, F., Lerch, R., & Sutor, A. (2014). An Inverted Preisach Model with Analytical Weight Function and its Numerical Discrete Formulation. In Proceedings of INTERMAG2014 (pp. 1462-1463).
    • Weiß, M., Ilg, J., Rupitsch, S., & Lerch, R. (2014). Inverse Method for Characterizing Material Parameters of Active and Passive components.
    • Gedeon, D., Rupitsch, S., & Lerch, R. (2014). Numerical and Experimental Study on the Frequency Tuning Characteristics of a Rotating Piezoelectric Energy Harvester. (pp. 2486-2489).

    2013

    • Albach, T., & Lerch, R. (2013). Magnetostrictive microelectromechanical loudspeaker. Journal of the Acoustical Society of America, 134(6), 4372-4380. https://dx.doi.org/10.1121/1.4824815
    • Schrapp, M., Scharrer, T., Goldammer, M., Rupitsch, S., Sutor, A., Ermert, H., & Lerch, R. (2013). Artifact reduction in non-destructive testing by means of complementary data fusion of x-ray computed tomography and ultrasonic pulse-echo testing. Measurement Science & Technology, 24(12), 1 - 10. https://dx.doi.org/10.1088/0957-0233/24/12/125403
    • Sutor, A., Bi, S., & Lerch, R. (2013). Validation of the rotational vector Preisach model with measurements and simulations of vectorial minor loops. Applied Physics A-Materials Science & Processing, 112(2), 269-273. https://dx.doi.org/10.1007/s00339-013-7806-0
    • Bi, S., Sutor, A., Lerch, R., & Xiao, Y. (2013). An Efficient Inverted Hysteresis Model with Modified Switch Operator and Differentiable Weight Function. IEEE Transactions on Magnetics, 49(7), 3175-3178. https://dx.doi.org/10.1109/TMAG.2013.2244583
    • Chen, L., Rupitsch, S., & Lerch, R. (2013). Quantitative Reconstruction of a Disturbed Ultrasound Pressure Field in a Conventional Hydrophone Measurement. IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control, 60(6), 1199-1206. https://dx.doi.org/10.1109/TUFFC.2013.2682
    • Ilg, J., Rupitsch, S., & Lerch, R. (2013). Impedance-Based Temperature Sensing With Piezoceramic Devices. IEEE Sensors Journal, 13(6), 2442-2449. https://dx.doi.org/10.1109/JSEN.2013.2256121
    • Wolf, F., Hirsch, H., Sutor, A., Rupitsch, S., & Lerch, R. (2013). Efficient Compensation of Nonlinear Transfer Characteristics for Piezoceramic Actuators. (pp. 171-174).
    • Scharrer, T., Koch, A., Rupitsch, S., Sutor, A., Ermert, H., & Lerch, R. (2013). Ultrasonic imaging of a turbine blade model using a 360° synthetic-aperture-focusing-technique and reverberation suppression. In 2013 IEEE International Ultrasonics Symposium Proceedings (pp. 150-153).
    • Koch, A., Genser, M., Stiller, F., Lerch, R., & Ermert, H. (2013). A new 3D-tomographic ultrasound imaging concept for breast cancer and rheumatoid arthritis diagnostics avoiding water bath techniques. (pp. 651-654).
    • Fendt, K., Mooshofer, H., Rupitsch, S., Lerch, R., & Ermert, H. (2013). Investigation of the Synthetic Aperture Focusing Technique resolution for heavy rotor forging ultrasonic inspection. (pp. 1869-1872).
    • Volk, A., Kaltenbacher, M., Sutor, A., Ertl, M., & Lerch, R. (2013). 3D Anisotropic Model for the Numerical Computation of Nonlinear Magnetostriction. In 19th International Conference on the Computation of Electromagnetic Fields (Compumag 2013).
    • Bi, S., Sutor, A., & Lerch, R. (2013). An efficient inverted hysteresis model with modified switch operator and differentiable weight function. In Proceedings of IEEE Magnetics Summer School (pp. 24).
    • Weiß, S., Thomson, S.L., Lerch, R., Döllinger, M., & Sutor, A. (2013). Pipette aspiration applied to the characterization of nonhomogeneous, transversely isotropic materials used for vocal fold modeling. Journal of the Mechanical Behavior of Biomedical Materials, 17, 137-151. https://dx.doi.org/10.1016/j.jmbbm.2012.08.005
    • Weiß, S., Thomson, S., Sutor, A., Rupitsch, S., & Lerch, R. (2013). Influence of Pipette Geometry on the Displacement Profile of Isotropic Materials used for Vocal Fold Modeling. In Proceedings of 6th International Conference on Biomedical Electronics and Devices (BIODEVICES) 2013 (pp. 108-113).
    • Rupitsch, S., Ilg, J., & Lerch, R. (2013). Inverse Scheme to Identify the Temperature Dependence of Electromechanical Coupling Factors for Piezoceramics. (pp. 183-186).

    2012

    • Koerdel, M., Alatas, F., Schick, A., Jongman, J., Sekhar, C., Rupitsch, S., & Lerch, R. (2012). Contactless Functionality Inspection of Flat-Panel-Display Pixels and Thin-Film Transistors by Capacitive Coupling. IEEE Transactions on Electron Devices, 59(12), 3411-3418. https://dx.doi.org/10.1109/TED.2012.2220362
    • Ilg, J., Rupitsch, S., Sutor, A., & Lerch, R. (2012). Determination of Dynamic Material Properties of Silicone Rubber Using One-Point Measurements and Finite Element Simulations. IEEE Transactions on Instrumentation and Measurement, 61(11), 3031-3038. https://dx.doi.org/10.1109/TIM.2012.2203449
    • Klassen, A., Rübner, M., Ilg, J., Rupitsch, S., Lerch, R., Singer, R., & Körner, C. (2012). Influence of the fabrication process on the functionality of piezoceramic patch transducers embedded in aluminum die castings. Smart Materials & Structures, 21(11). https://dx.doi.org/10.1088/0964-1726/21/11/115014
    • Koerdel, M., Alatas, F., Schick, A., Rupitsch, S., & Lerch, R. (2012). Contactless inspection of electrically isolated electronic components of planar electronic devices by capacitive coupling. (pp. 54-62). Elsevier.
    • Scharrer, T., Koch, A., Fendt, K., Rupitsch, S., Sutor, A., Ermert, H., & Lerch, R. (2012). Ultrasonic defect detection in multi-material, axis-symmetric devices with an improved synthetic aperture focusing technique (SAFT). In 2012 IEEE International Ultrasonics Symposium Proceedings (pp. 1039-1042).
    • Wolf, F., Sutor, A., Rupitsch, S., & Lerch, R. (2012). A generalized Preisach approach for piezoceramic materials incorporating uniaxial compressive stress. (pp. 223-229). Elsevier.
    • Rupitsch, S., Wolf, F., Sutor, A., & Lerch, R. (2012). Reliable modeling of piezoceramic materials utilized in sensors and actuators. Acta Mechanica, 223(8), 1809-1821. https://dx.doi.org/10.1007/s00707-012-0639-7
    • Sutor, A., Hornung, J., Goßler, J., Döllinger, M., & Lerch, R. (2012). A method for characterizing stapes prostheses by their mechanical transfer function. Medical Engineering & Physics, 34(5), 659-663. https://dx.doi.org/10.1016/j.medengphy.2012.02.001
    • Chen, L., Rupitsch, S., & Lerch, R. (2012). A Reliability Study of Light Refractive Tomography Utilized for Noninvasive Measurement of Ultrasound Pressure Fields. IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control, 59(5), 915-927. https://dx.doi.org/10.1109/TUFFC.2012.2276
    • Sutor, A., Kallwies, J., & Lerch, R. (2012). An efficient vector Preisach hysteresis model based on a novel rotational operator. Journal of Applied Physics, 111(7). https://dx.doi.org/10.1063/1.3672069
    • Lerch, R. (2012). Elektrische Messtechnik. Heidelberg: Springer Vieweg.
    • Koch, A., Gruber, S., Scharrer, T., Fendt, K., Lerch, R., & Ermert, H. (2012). 2D transmission imaging with a crossed-array configuration for defect detection. In 2012 IEEE International Ultrasonics Symposium Proceedings (pp. 36-39).
    • Chen, L., Rupitsch, S., & Lerch, R. (2012). Application of Light Refractive Tomography for Reconstructing Ultrasound Fields in Various Media. Tm-Technisches Messen, 79(10), 459-463. https://dx.doi.org/10.1524/teme.2012.0257
    • Hochradel, K., Rupitsch, S., Sutor, A., Lerch, R., Vu, D.K., & Steinmann, P. (2012). Dynamic performance of dielectric elastomers utilized as acoustic actuators. Applied Physics A-Materials Science & Processing, -. https://dx.doi.org/10.1007/s00339-012-6837-2
    • Ploß, P., Rupitsch, S., Fröhlich, T., & Lerch, R. (2012). Identification of Acoustic Wave Orientation for Ultrasound-Based Flow Measurement by Exploiting the Hough Transform. (pp. 216-219). Elsevier BV.
    • Koch, A., Koch, I., Hansen, C., Lerch, R., & Ermert, H. (2012). Numerical Ray-Tracing in Full Angle Spatial Compounding. (pp. 103-113).
    • Rupitsch, S., Glaser, D., & Lerch, R. (2012). Simultaneous Determination of Speed of Sound and Sample Thickness Utilizing Coded Excitation. (pp. 711-714). IEEE SERVICE CENTER, 445 HOES LANE, PO BOX 1331, PISCATAWAY, NJ 08855-1331 USA.
    • Ilg, J., Rupitsch, S., & Lerch, R. (2012). Temperature measurements by means of the electrical impedance of piezoceramics. (pp. 1851-1855). Institute of Electrical and Electronics Engineers.
    • Sutor, A., Kallwies, J., & Lerch, R. (2012). Vectorial Measuring and Modelling of Magnetic Hysteresis. Tm-Technisches Messen, 79(4), 220-228. https://dx.doi.org/10.1524/teme.2012.0225
    • Chen, L., Rupitsch, S., & Lerch, R. (2012). Non-perturbing measurement of sound pressure fields by means of laser Doppler vibrometer. (pp. 1095-1098).
    • Chen, L., Rupitsch, S., & Lerch, R. (2012). Noninvasive measurement of time-dependent ultrasound fields in different materials. (pp. 2176-2179). IEEE SERVICE CENTER, 445 HOES LANE, PO BOX 1331, PISCATAWAY, NJ 08855-1331 USA.
    • Wolf, F., Sutor, A., Rupitsch, S., & Lerch, R. (2012). A modified scalar Preisach model with an analytic weight function for piezoceramic actuators. In 8th International Workshop on Direct and Inverse Problems in Piezoelectricity - Book of Abstracts.
    • Gedeon, D., Rupitsch, S., Lerch, R., Luegmair, G., & Döllinger, M. (2012). A Novel Setup for the Controlled Adduction of Vocal Folds. In R. Scheidl and B. Jakoby (Eds.), Mechatronics 2012 - The 13th Mechatronics Forum International Conference (pp. 135-141). Linz: Trauner.
    • Koch, A., Finzel, S., Kobler, A., Schett, G., Lerch, R., & Ermert, H. (2012). In-vivo results for rheumatoid arthritis diagnosis with a 360 degrees pulse-echo imaging system. (pp. 134-137). IEEE SERVICE CENTER, 445 HOES LANE, PO BOX 1331, PISCATAWAY, NJ 08855-1331 USA.
    • Weiß, S., Thomson, S., Sutor, A., Bohr, C., & Lerch, R. (2012). Pipette aspiration applied to the measurement of anisotropic materials used for vocal fold modeling. In Proceedings of 8th International Conference on Voice Physiology and Biomechanics (ICVPB) 2012 (pp. 140-141).

    2011

    • Wolf, F., Sutor, A., Rupitsch, S., & Lerch, R. (2011). Modeling and measurement of creep- and rate-dependent hysteresis in ferroelectric actuators. Sensors and Actuators A-Physical, 172(1), 245-252. https://dx.doi.org/10.1016/j.sna.2011.02.026
    • Koerdel, M., Alatas, F., Schick, A., Rupitsch, S., & Lerch, R. (2011). Contactless inspection of planar electronic devices by capacitive coupling: Development of a model describing the sensor signal and its impact on signal post-processing. Sensors and Actuators A-Physical, 172(1), 88-97. https://dx.doi.org/10.1016/j.sna.2011.02.040
    • Hüttner, B., Sutor, A., Luegmair, G., Rupitsch, S., Lerch, R., & Döllinger, M. (2011). Optical 3-D Metric Measurements of Local Vocal Fold Deformation Characteristics in an In Vitro Setup. IEEE Transactions on Biomedical Engineering, 58(10), 2758-2766. https://dx.doi.org/10.1109/TBME.2011.2130525
    • Koerdel, M., Alatas, F., Schick, A., Kragler, K., Weisfield, R.L., Rupitsch, S., & Lerch, R. (2011). Contactless Inspection of Flat-Panel Displays and Detector Panels by Capacitive Coupling. IEEE Transactions on Electron Devices, 58(10), 3453-3462. https://dx.doi.org/10.1109/TED.2011.2161583
    • Rupitsch, S., Ilg, J., Sutor, A., Lerch, R., & Döllinger, M. (2011). Simulation based estimation of dynamic mechanical properties for viscoelastic materials used for vocal fold models. Journal of Sound and Vibration, 330(18-19), 4447-4459. https://dx.doi.org/10.1016/j.jsv.2011.05.008
    • Bi, S., Sutor, A., Lerch, R., & Xiao, Y. (2011). A measurement setup for acquiring the local magnetic properties of plastically deformed soft magnetic materials. Journal of Applied Physics, 109(7). https://dx.doi.org/10.1063/1.3535549
    • Sutor, A., Rupitsch, S., Bi, S., & Lerch, R. (2011). A modified Preisach hysteresis operator for the modeling of temperature dependent magnetic material behavior. Journal of Applied Physics, 109(7). https://dx.doi.org/10.1063/1.3562520
    • Albach, T., Horn, P., Sutor, A., & Lerch, R. (2011). Sound Generation Using a Magnetostrictive Microactuator. Journal of Applied Physics, 109(7). https://dx.doi.org/10.1063/1.3554200
    • Rupitsch, S., Lerch, R., Strobel, J., & Streicher, A. (2011). Ultrasound Transducers Based on Ferroelectret Materials. IEEE Transactions on Dielectrics and Electrical Insulation, 18(1), 69-80.
    • Koerdel, M., Alatas, F., Schick, A., Rupitsch, S., & Lerch, R. (2011). Impact of sensor design on the contactless inspection of planar electronic devices by capacitive coupling. Elsevier BV.
    • Rupitsch, S., Ilg, J., Sutor, A., & Lerch, R. (2011). Variation of material parameters for the thickness extensional mode of piezoceramic discs in case of mechanical loading. Elsevier BV.
    • Sutor, A., Rupitsch, S., & Lerch, R. (2011). Research on Ferroelectret Based Ultrasound Transducers. In Proceedings of SENSOR+TEST Conference 2011 (pp. 187-192).
    • Sutor, A., Kallwies, J., & Lerch, R. (2011). Magnetische Vektorhysterese: Messtechnik und Modellierung. In Leon FP, Beyerer J (Eds.), XV. Messtechnisches Symposium (pp. 27-38). Aachen: Shaker Verlag.
    • Weiß, S., Sutor, A., Ilg, J., & Lerch, R. (2011). Measurement of the elasticity modulus of artificial and real vocal folds using pipette aspiration. In Proceedings of 7th international workshop on Models and Analysis of Vocal Emissions for Biomedical Applications (MAVEBA) 2011 (pp. 45-48).
    • Klassen, A., Rübner, M., Ilg, J., Rupitsch, S., Lerch, R., Körner, C., & Singer, R. (2011). Integration of piezoceramic sensors and actuators into structural components via high pressure die casting. In R. Neugebauer (Eds.), Proceedings of the CRC/TR39 3rd Scientific Symposium "Integration of Active Functions into Structural Elements" (pp. 45-50). Chemnitz.
    • Rupitsch, S., Sutor, A., Albach, T., Hauck, A., Lerch, R., & Kaltenbacher, M. (2011). Design of Sensors and Actuators Utilizing Computer Tools. In Proceedings Sensor + Test 2011 (pp. 240-245).
    • Albach, T., Horn, P., Ilg, J., Friedrich, S., Sutor, A., & Lerch, R. (2011). Towards a Magnetostrictive Micro-Loudspeaker. In 15th Int. Conf. on Sensors and Measurement Technology, SENSOR 2011 (pp. 477-482). Nürnberg.
    • Wolf, F., Sutor, A., Rupitsch, S., & Lerch, R. (2011). Characterization of Dynamic Hysteresis Behavior of Ferroelectric Actuators. In Proceedings Sensor + Test 2011 (pp. 328-333).
    • Wolf, F., Sutor, A., Rupitsch, S., & Lerch, R. (2011). Modeling and measurement of influence of mechanical prestress on hysteresis of ferroelectric actuators. Procedia Engineering, 25, 1613-1616. https://dx.doi.org/10.1016/j.proeng.2011.12.399
    • Wolf, F., Sutor, A., Rupitsch, S., & Lerch, R. (2011). Characterization of piezoceramic materials using a modified scalar Preisach model with an analytic weight function. In 7th International Workshop on Direct and Inverse Problems in Piezoelectricity - Book of Abstracts.
    • Rübner, M., Klassen, A., Körner, C., Singer, R., Ilg, J., Rupitsch, S., & Lerch, R. (2011). Dünnwandige Aluminiumdruckgussteile mit integrierten piezokeramischen Sensoren und Aktoren - Fertigung und Charakterisierung. In B. Wielage (Eds.), Tagungsband zum 18. Symposium Verbundwerkstoffe und Werkstoffverbunde (pp. 277-282). Chemnitz.

    2010

    • Sutor, A., Rupitsch, S., & Lerch, R. (2010). A Preisach-based hysteresis model for magnetic and ferroelectric hysteresis. Applied Physics A-Materials Science & Processing, 100(2), 425-430. https://dx.doi.org/10.1007/s00339-010-5884-9
    • Zoerner, S., Kaltenbacher, M., Lerch, R., Sutor, A., & Döllinger, M. (2010). Measurement of the elasticity modulus of soft tissues. Journal of Biomechanics, 43(8), 1540-1545. https://dx.doi.org/10.1016/j.jbiomech.2010.01.035
    • Kaltenbacher, M., Kaltenbacher, B., Hegewald, T., & Lerch, R. (2010). Finite Element Formulation for Ferroelectric Hysteresis of Piezoelectric Materials. Journal of Intelligent Material Systems and Structures, 21(8), 773-785. https://dx.doi.org/10.1177/1045389X10366319
    • Wolf, F., Sutor, A., Rupitsch, S., & Lerch, R. (2010). Modeling and measurement of hysteresis of ferroelectric actuators considering time-dependent behavior. (pp. 87-90). Elsevier BV.
    • Koerdel, M., Alatas, F., Schick, A., Rupitsch, S., & Lerch, R. (2010). Modelling the capacitive coupling of sensors applied to the contactless inspection of planar electronics. (pp. 400-403). Elsevier BV.
    • Albach, T., Sutor, A., Lerch, R., & Sutor, A. (2010). Analysis of Magnetostrictive Microactuators. Tm-Technisches Messen, 77(2), 67-73. https://dx.doi.org/10.1524/teme.2010.0011
    • Wolf, F., Sutor, A., Rupitsch, S., & Lerch, R. (2010). Messtechnische Erfassung und Modellierung der Hysterese ferroelektrischer Werkstoffe. In Proceedings Sensoren und Messsysteme 2010 (pp. 421-424).
    • Ilg, J., Rupitsch, S., Sutor, A., & Lerch, R. (2010). Bestimmung der dynamischen Materialeigenschaften von künstlichen Stimmlippen mittels optischer Messtechnik. In Fortschritte der Akustik - DAGA 2010 (pp. 263-264).
    • Rupitsch, S., Sutor, A., Ilg, J., Wolf, F., & Lerch, R. (2010). Estimation of Material Parameters for Piezoelectric Actuators Using Electrical and Mechanical Quantities. In 6th International Workshop on Direct and Inverse Problems in Piezoelectricity - Book of Abstracts.
    • Sutor, A., Albach, T., Lerch, R., Weidner, T., & Weistenhöfer, C. (2010). Hörvorrichtung mit einem Schallwandler und Verfahren zum Herstellen eines Schallwandlers. .
    • Albach, T., Horn, P., Sutor, A., & Lerch, R. (2010). Sound Generation Using a Magnetostrictive Micro-Actuator. In 55th Annual Conference on Magnetism and Magnetic Materials (MMM)Atlanta, GA, USA: PCI/AIP and IEEE.
    • Sutor, A., Albach, T., Lerch, R., Weidner, T., & Weistenhöfer, C. (2010). Hearing Device with a Sound Transducer and Method for Producing a Sound Transducer. .
    • Rupitsch, S., Sutor, A., Ilg, J., & Lerch, R. (2010). Identification Procedure for Real and Imaginary Material Parameters of Piezoceramic Materials. In Proceedings of the IEEE Ultrasonic Symposium (pp. 1214-1217).

    2007

    • Bräutigam, V., Körner, C., Singer, R., Kaltenbacher, M., Meiler, M., & Lerch, R. (2007). Smart structural components by integration of sensor/actuator-modules in die castings. San Diego, CA.

    2001

    • Hofer, M., Jungwirth, M., Lerch, R., & Weigel, R. (2001). Accurate and Efficient Modeling of SAW Structures. Frequenz, 55(1), 64-72.

    1998

    • Lerch, R., & Weigel, R. (1998). Akustik im Bereich Mechatronik der Universität Linz. In 48. Jahrestagung der Österreichischen Physikalischen Gesellschaft (ÖPG) - Fachtagung Akustik (pp. 137).
  • Publikationen (bis Ende 2009) von Reinhard Lerch.